Invitation to Bid - POWER TOOL FOR FASTENING,Knurling tool Diamond AND straight AND Diagonal,DRILLS GUAGE STRAIGHT SHAN in JUNAGADH, GUJARAT
Bid Publish Date
16-Oct-2026, 12:16 pm
Bid End Date
31-Oct-2026, 1:00 pm
EMD
₹17,571
Value
₹5,85,700
Location
Progress
Public procurement opportunity for Directorate Of Employment & Training POWER TOOL FOR FASTENING, Knurling tool Diamond AND straight AND Diagonal, DRILLS GUAGE STRAIGHT SHANK, JIGS AND FIXTURE FOR SAMPLE, COMPRESSOR UNIT SPEC AS PER FITTER SYLLABUS IN DGT WEBSITE, PNEUMATIC WORKSTATION SPECIFICATION AS PER FITTER SYLLABUS IN DGT WEBSITE, CARRIER FOR MOUNTING COMPONENTS SUCH AS PB RELAY BOXES, CUT SECTION MODELS FOR PENUMATIC COMPONENTS, HYDRAULIC WORKSTATION SPEC AS PER FITTER SYLLABUS IN DGT WEBSITE, CUT SECTION MODELS FOR HYDRAULIC COMPONENTS, BORING BAR INDEXABLE WITH INSERT 1 INCH SHANK, FILE ROUND BASTARD 250 MM, PROFILE GAUGES PLATE TYPE FOR DEMONSTRATION METRIC STANDARD, STANDARD TAP SCREWS, LAPPING PLATE, Pipe threading die with handle, KEY TO FIT SHAFT AND PULLEY, GEAR - SPUR OLD DAMAGED TO FIT, SURFACE ROUGHNESS COMPARISION, DRILL GAUGE, GLOBE VALVE CAST IRON, GATE VALVE DIA, STOP COCK 25NB, DRIFT DRILL 200 MM HARDENED AND BLACK FINISH, CALIPER OUTSIDE SPRING 150MM, CALIPER HERMAPHRODITE SPRING 15 CM, SCRIBER 150MM, Hammer ball PEEN With handle 220 GM, SCREW DRIVER INSULATED, File flat smooth, WELDING TRANSFORMER WITH ALL ACCESSORIES, MARKING TABLE OR SURFACE PLATE, DRILL TWIST TAPER SHANK, FILE KNIFE EDGE SMOOTH, FILE FLAT 2ND CUT, FILE SWISS NEEDLE INSTRUMENT SET OF 12 NOS 150 MM, FILE HAND 2ND CUT, SCRAPER FLAT, VICE MACHINE, Steel Rule with metric British graduation, Try Square 150MM BLADE, Scriber, Centre Punch, Chisel cold flat, Hammer ball peen With handle, File flat second cut, File half round second cut, Hacksaw frame fixed type, Dot punch, Safety goggles in JUNAGADH, GUJARAT. Quantity: 337 issued by. Submission Deadline: 31-10-2026 13: 00: 00. View full details and respond.
Tender Data
Bid Details
Quantity
337
Category
POWER TOOL FOR FASTENING
Bid Type
Two Packet Bid
Bid Validity
180 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
Tech Clarification Time
2 Days
Preference & Exemptions
EMD Required
Yes
MII Purchase Preference
No
MSE Purchase Preference
Yes
MSE Preference Band
L1+20%
MSE Exemption/Relaxation
No
Startup Exemption/Relaxation
Yes
Bid Splitting Applied
No
Requirements
Min. Avg. Annual Turnover
2
OEM Avg. Turnover
6
Past Performance
10 %
Warranty Period
15 days
Experience Required
3 Year (s)
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
POWER TOOL FOR FASTENING , Knurling tool Diamond AND straight AND Diagonal , DRILLS GUAGE STRAIGHT SHANK , JIGS AND FIXTURE FOR SAMPLE , COMPRESSOR UNIT SPEC AS PER FITTER SYLLABUS IN DGT WEBSITE , PNEUMATIC WORKSTATION SPECIFICATION AS PER FITTER SYLLABUS IN DGT WEBSITE , CARRIER FOR MOUNTING COMPONENTS SUCH AS PB RELAY BOXES , CUT SECTION MODELS FOR PENUMATIC COMPONENTS , HYDRAULIC WORKSTATION SPEC AS PER FITTER SYLLABUS IN DGT WEBSITE , CUT SECTION MODELS FOR HYDRAULIC COMPONENTS , BORING BAR INDEXABLE WITH INSERT 1 INCH SHANK , FILE ROUND BASTARD 250 MM , PROFILE GAUGES PLATE TYPE FOR DEMONSTRATION METRIC STANDARD , STANDARD TAP SCREWS , LAPPING PLATE , Pipe threading die with handle , KEY TO FIT SHAFT AND PULLEY , GEAR - SPUR OLD DAMAGED TO FIT , SURFACE ROUGHNESS COMPARISION , DRILL GAUGE , GLOBE VALVE CAST IRON , GATE VALVE DIA , STOP COCK 25NB , DRIFT DRILL 200 MM HARDENED AND BLACK FINISH , CALIPER OUTSIDE SPRING 150MM , CALIPER HERMAPHRODITE SPRING 15 CM , SCRIBER 150MM , Hammer ball PEEN With handle 220 GM , SCREW DRIVER INSULATED , File flat smooth , WELDING TRANSFORMER WITH ALL ACCESSORIES , MARKING TABLE OR SURFACE PLATE , DRILL TWIST TAPER SHANK , FILE KNIFE EDGE SMOOTH , FILE FLAT 2ND CUT , FILE SWISS NEEDLE INSTRUMENT SET OF 12 NOS 150 MM , FILE HAND 2ND CUT , SCRAPER FLAT , VICE MACHINE , Steel Rule with metric British graduation , Try Square 150MM BLADE , Scriber , Centre Punch , Chisel cold flat , Hammer ball peen With handle , File flat second cut , File half round second cut , Hacksaw frame fixed type , Dot punch , Safety goggles
Advisory Bank
State Bank of India
ePBG Percentage
5%
ePBG Duration (Months)
12
Payment Timelines
Payments shall be made to the Seller within 40 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)
Pre-Bid & Qualification
Pre-Bid Date
19-10-2026 14:00:00
Pre-Bid Venue
ITI - MALIYA HATINA , NEAR PETROL PUMP, GALODAR-MALIYA ROAD, MALIYA HATINA - 3662245 DIST. : JUNAGADH
Delivery Details
Max Delivery Days
15
Delivery Locations
1
Delivery Cities
Junagadh
Delivery Pincodes
362245
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| Parmar Anilkumar Jagdishbhai | 362245,GOVT. INDUSTRIAL TRAINING INSTITUTE, MALIYA (HATINA), GALODAR - MALIYA ROAD, NEAR - PETROL PUMP. TA - MALIYA HATINA, DI - JUNAGADH | Junagadh | Gujarat | 362245 | 1 | 15 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-10019555.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
54 Items Sign in to view GEM price trends Sign in for GEM prices
POWER TOOL FOR FASTENING
CAPACITY 10 TO 18MM
Knurling tool Diamond AND straight AND Diagonal
Knurling tool Diamond AND straight AND Diagonal
DRILLS GUAGE STRAIGHT SHANK
LETTER SIZES A TO Z WITH GUAGE
DRILLS GUAGE STRAIGHT SHANK
WIRE SIZE 1 TO 60 WITH GUAGE
JIGS AND FIXTURE FOR SAMPLE
FOR DEMONSTRATION
COMPRESSOR UNIT SPEC AS PER FITTER SYLLABUS IN DGT WEBSITE
SUITABLE FOR PRESSURE 8 BAR AND DELIVERY 50 LPM OR MORE AND RESERVOIR CAPACITY 24 LITRES OR MORE 230V 50 HZ WITH PRESSURE REGULATOR AND WATER SEPARATOR
PNEUMATIC WORKSTATION SPECIFICATION AS PER FITTER SYLLABUS IN DGT WEBSITE
1 Worktable Size Approximately L1200mm X W900mm X H900 mm with four castor wheels including two lockable wheels at the front side 2 Drawer Size Approx L460mm BY W495mm BY H158mm each and overall size of Drawer unit Approx L470mm X W495mm X H825m m and 3 Drawer slide height Approx 85mm
CARRIER FOR MOUNTING COMPONENTS SUCH AS PB RELAY BOXES
CARRIER FOR MOUNTING COMPONENTS SUCH AS PB RELAY BOXES
CUT SECTION MODELS FOR PENUMATIC COMPONENTS
CUT SECTION MODELS FOR PENUMATIC COMPONENTS SPECIFICATION AS PER FITTER SYLLABUS IN DGT WEBSITE
HYDRAULIC WORKSTATION SPEC AS PER FITTER SYLLABUS IN DGT WEBSITE
1 Worktable Size Approximately L1200mm X W900mm X H900 mm with four castor wheels including two lockable wheels at the front side 2 Drawer Size Approx L460mm BY W495mm BY H158mm each and overall size of Drawer unit Approx L470mm X W495mm X H825m m and 3 Drawer slide height Approx 85mm
CUT SECTION MODELS FOR HYDRAULIC COMPONENTS
CUT SECTION MODELS FOR HYDRAULIC COMPONENTS SPEC AS PER FITTER SYLLABUS IN DGT WEBSITE
BORING BAR INDEXABLE WITH INSERT 1 INCH SHANK
WITH INSERT 1 INCH SHANK
FILE ROUND BASTARD 250 MM
250MM
PROFILE GAUGES PLATE TYPE FOR DEMONSTRATION METRIC STANDARD
SPECIFICATION AS PER FITTER SYLLABUS IN DGT WEBSITE
STANDARD TAP SCREWS
M3 M4 M5 M6 M8 M10 M12 M14 M16
LAPPING PLATE
SPECIFICATION AS PER FITTER SYLLABUS IN DGT WEBSITE
Pipe threading die with handle
Ratchet type die head 1 BY 2 INCH AND 3 BY 4 INCH AND 1 INCH
KEY TO FIT SHAFT AND PULLEY
SPECIFICATION AS PER FITTER SYLLABUS IN DGT WEBSITE
GEAR - SPUR OLD DAMAGED TO FIT
50 MM SHAFT DIA
SURFACE ROUGHNESS COMPARISION
PLATES N1 TO N12 GRADE
DRILL GAUGE
1 POINT 5 MM IN WORD HALF TO 12 POINT 5 MM IN WORD TWELVE POINT FIVE STEPS OF 0 POINT 5 IN WORD HALF MM
GLOBE VALVE CAST IRON
FLANGED TYPE 150NB CLASS 150 FLANGE ANSI125 B16 POINT 1 AS PER FITTER SYLLABUS IN DGT WEBSITE
GATE VALVE DIA
FLANGED TYPE 150NB CLASS 150 FLANGE ANSI125 B16 POINT 1 AS PER FITTER SYLLABUS IN DGT WEBSITE
STOP COCK 25NB
2 WAY AND THREADED END AND WASHER AND CLUTCH AND KEYS AND JIB AND COTTER AND CIRCLIP MINIMUM 25MM SIZE AND CARBON STEEL MATERIAL
DRIFT DRILL 200 MM HARDENED AND BLACK FINISH
DRIFT DRILL 200 MM HARDENED AND BLACK FINISH
CALIPER OUTSIDE SPRING 150MM
150MM
CALIPER HERMAPHRODITE SPRING 15 CM
150MM
SCRIBER 150MM
150MM
Hammer ball PEEN With handle 220 GM
220 GM
SCREW DRIVER INSULATED
150MM
File flat smooth
6 INCH OR 150 MM
WELDING TRANSFORMER WITH ALL ACCESSORIES
400A NAD OCV 60 TO 100 V AND 60% DUTY CYCLE)
MARKING TABLE OR SURFACE PLATE
TABLE 900 X 900 X 900 MM HEIGHT AS PER FITTER SYLLABUS IN DGT WEBSITE
DRILL TWIST TAPER SHANK
8 MM TO 20 MM BY 0 POINT 5 MM IN WORD HALF MM
FILE KNIFE EDGE SMOOTH
150 MM
FILE FLAT 2ND CUT
300 MM SAFE EDGE
FILE SWISS NEEDLE INSTRUMENT SET OF 12 NOS 150 MM
SET OF 12 NOS 150 MM
FILE HAND 2ND CUT
150 MM
SCRAPER FLAT
12 MM X 150 MM
VICE MACHINE
100 MM SWIVEL BASE
VICE MACHINE
125 MM SWIVEL BASE
Steel Rule with metric British graduation
150 mm Stainless steel
Try Square 150MM BLADE
150 mm blade
Scriber
150 mm
Centre Punch
10 mm and Length 120 mm
Chisel cold flat
20 mm X 150 mm High carboon steel
Hammer ball peen With handle
450 grams OR 1 lb
Hammer ball peen With handle
220 grams OR 1 BY 2 lb
File flat second cut
250 mm
File flat smooth
250 mm
File half round second cut
150 mm
Hacksaw frame fixed type
300 mm
Dot punch
100 mm
Safety goggles
AS PER FITTER SYLLABUS
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | POWER TOOL FOR FASTENING | CAPACITY 10 TO 18MM | 1 | no | maliyahatina_con | 15 | |
| 2 | Knurling tool Diamond AND straight AND Diagonal | Knurling tool Diamond AND straight AND Diagonal | 1 | no | maliyahatina_con | 15 | |
| 3 | DRILLS GUAGE STRAIGHT SHANK | LETTER SIZES A TO Z WITH GUAGE | 1 | no | maliyahatina_con | 15 | |
| 4 | DRILLS GUAGE STRAIGHT SHANK | WIRE SIZE 1 TO 60 WITH GUAGE | 1 | no | maliyahatina_con | 15 | |
| 5 | JIGS AND FIXTURE FOR SAMPLE | FOR DEMONSTRATION | 1 | no | maliyahatina_con | 15 | |
| 6 | COMPRESSOR UNIT SPEC AS PER FITTER SYLLABUS IN DGT WEBSITE | SUITABLE FOR PRESSURE 8 BAR AND DELIVERY 50 LPM OR MORE AND RESERVOIR CAPACITY 24 LITRES OR MORE 230V 50 HZ WITH PRESSURE REGULATOR AND WATER SEPARATOR | 1 | no | maliyahatina_con | 15 | |
| 7 | PNEUMATIC WORKSTATION SPECIFICATION AS PER FITTER SYLLABUS IN DGT WEBSITE | 1 Worktable Size Approximately L1200mm X W900mm X H900 mm with four castor wheels including two lockable wheels at the front side 2 Drawer Size Approx L460mm BY W495mm BY H158mm each and overall size of Drawer unit Approx L470mm X W495mm X H825m m and 3 Drawer slide height Approx 85mm | 1 | no | maliyahatina_con | 15 | |
| 8 | CARRIER FOR MOUNTING COMPONENTS SUCH AS PB RELAY BOXES | CARRIER FOR MOUNTING COMPONENTS SUCH AS PB RELAY BOXES | 1 | no | maliyahatina_con | 15 | |
| 9 | CUT SECTION MODELS FOR PENUMATIC COMPONENTS | CUT SECTION MODELS FOR PENUMATIC COMPONENTS SPECIFICATION AS PER FITTER SYLLABUS IN DGT WEBSITE | 1 | no | maliyahatina_con | 15 | |
| 10 | HYDRAULIC WORKSTATION SPEC AS PER FITTER SYLLABUS IN DGT WEBSITE | 1 Worktable Size Approximately L1200mm X W900mm X H900 mm with four castor wheels including two lockable wheels at the front side 2 Drawer Size Approx L460mm BY W495mm BY H158mm each and overall size of Drawer unit Approx L470mm X W495mm X H825m m and 3 Drawer slide height Approx 85mm | 1 | no | maliyahatina_con | 15 | |
| 11 | CUT SECTION MODELS FOR HYDRAULIC COMPONENTS | CUT SECTION MODELS FOR HYDRAULIC COMPONENTS SPEC AS PER FITTER SYLLABUS IN DGT WEBSITE | 1 | no | maliyahatina_con | 15 | |
| 12 | BORING BAR INDEXABLE WITH INSERT 1 INCH SHANK | WITH INSERT 1 INCH SHANK | 4 | no | maliyahatina_con | 15 | |
| 13 | FILE ROUND BASTARD 250 MM | 250MM | 3 | no | maliyahatina_con | 15 | |
| 14 | PROFILE GAUGES PLATE TYPE FOR DEMONSTRATION METRIC STANDARD | SPECIFICATION AS PER FITTER SYLLABUS IN DGT WEBSITE | 4 | no | maliyahatina_con | 15 | |
| 15 | STANDARD TAP SCREWS | M3 M4 M5 M6 M8 M10 M12 M14 M16 | 1 | no | maliyahatina_con | 15 | |
| 16 | LAPPING PLATE | SPECIFICATION AS PER FITTER SYLLABUS IN DGT WEBSITE | 2 | no | maliyahatina_con | 15 | |
| 17 | Pipe threading die with handle | Ratchet type die head 1 BY 2 INCH AND 3 BY 4 INCH AND 1 INCH | 1 | no | maliyahatina_con | 15 | |
| 18 | KEY TO FIT SHAFT AND PULLEY | SPECIFICATION AS PER FITTER SYLLABUS IN DGT WEBSITE | 2 | no | maliyahatina_con | 15 | |
| 19 | GEAR - SPUR OLD DAMAGED TO FIT | 50 MM SHAFT DIA | 2 | no | maliyahatina_con | 15 | |
| 20 | SURFACE ROUGHNESS COMPARISION | PLATES N1 TO N12 GRADE | 1 | no | maliyahatina_con | 15 | |
| 21 | DRILL GAUGE | 1 POINT 5 MM IN WORD HALF TO 12 POINT 5 MM IN WORD TWELVE POINT FIVE STEPS OF 0 POINT 5 IN WORD HALF MM | 1 | no | maliyahatina_con | 15 | |
| 22 | GLOBE VALVE CAST IRON | FLANGED TYPE 150NB CLASS 150 FLANGE ANSI125 B16 POINT 1 AS PER FITTER SYLLABUS IN DGT WEBSITE | 1 | no | maliyahatina_con | 15 | |
| 23 | GATE VALVE DIA | FLANGED TYPE 150NB CLASS 150 FLANGE ANSI125 B16 POINT 1 AS PER FITTER SYLLABUS IN DGT WEBSITE | 1 | no | maliyahatina_con | 15 | |
| 24 | STOP COCK 25NB | 2 WAY AND THREADED END AND WASHER AND CLUTCH AND KEYS AND JIB AND COTTER AND CIRCLIP MINIMUM 25MM SIZE AND CARBON STEEL MATERIAL | 1 | no | maliyahatina_con | 15 | |
| 25 | DRIFT DRILL 200 MM HARDENED AND BLACK FINISH | DRIFT DRILL 200 MM HARDENED AND BLACK FINISH | 2 | no | maliyahatina_con | 15 | |
| 26 | CALIPER OUTSIDE SPRING 150MM | 150MM | 1 | no | maliyahatina_con | 15 | |
| 27 | CALIPER HERMAPHRODITE SPRING 15 CM | 150MM | 14 | no | maliyahatina_con | 15 | |
| 28 | SCRIBER 150MM | 150MM | 15 | no | maliyahatina_con | 15 | |
| 29 | Hammer ball PEEN With handle 220 GM | 220 GM | 2 | no | maliyahatina_con | 15 | |
| 30 | SCREW DRIVER INSULATED | 150MM | 1 | no | maliyahatina_con | 15 | |
| 31 | File flat smooth | 6 INCH OR 150 MM | 10 | no | maliyahatina_con | 15 | |
| 32 | WELDING TRANSFORMER WITH ALL ACCESSORIES | 400A NAD OCV 60 TO 100 V AND 60% DUTY CYCLE) | 1 | no | maliyahatina_con | 15 | |
| 33 | MARKING TABLE OR SURFACE PLATE | TABLE 900 X 900 X 900 MM HEIGHT AS PER FITTER SYLLABUS IN DGT WEBSITE | 1 | no | maliyahatina_con | 15 | |
| 34 | DRILL TWIST TAPER SHANK | 8 MM TO 20 MM BY 0 POINT 5 MM IN WORD HALF MM | 2 | no | maliyahatina_con | 15 | |
| 35 | FILE KNIFE EDGE SMOOTH | 150 MM | 1 | no | maliyahatina_con | 15 | |
| 36 | FILE FLAT 2ND CUT | 300 MM SAFE EDGE | 4 | no | maliyahatina_con | 15 | |
| 37 | FILE SWISS NEEDLE INSTRUMENT SET OF 12 NOS 150 MM | SET OF 12 NOS 150 MM | 1 | no | maliyahatina_con | 15 | |
| 38 | FILE HAND 2ND CUT | 150 MM | 1 | no | maliyahatina_con | 15 | |
| 39 | SCRAPER FLAT | 12 MM X 150 MM | 5 | no | maliyahatina_con | 15 | |
| 40 | VICE MACHINE | 100 MM SWIVEL BASE | 1 | no | maliyahatina_con | 15 | |
| 41 | VICE MACHINE | 125 MM SWIVEL BASE | 1 | no | maliyahatina_con | 15 | |
| 42 | Steel Rule with metric British graduation | 150 mm Stainless steel | 30 | no | maliyahatina_con | 15 | |
| 43 | Try Square 150MM BLADE | 150 mm blade | 14 | no | maliyahatina_con | 15 | |
| 44 | Scriber | 150 mm | 23 | no | maliyahatina_con | 15 | |
| 45 | Centre Punch | 10 mm and Length 120 mm | 28 | no | maliyahatina_con | 15 | |
| 46 | Chisel cold flat | 20 mm X 150 mm High carboon steel | 23 | no | maliyahatina_con | 15 | |
| 47 | Hammer ball peen With handle | 450 grams OR 1 lb | 4 | no | maliyahatina_con | 15 | |
| 48 | Hammer ball peen With handle | 220 grams OR 1 BY 2 lb | 1 | no | maliyahatina_con | 15 | |
| 49 | File flat second cut | 250 mm | 20 | no | maliyahatina_con | 15 | |
| 50 | File flat smooth | 250 mm | 16 | no | maliyahatina_con | 15 | |
| 51 | File half round second cut | 150 mm | 18 | no | maliyahatina_con | 15 | |
| 52 | Hacksaw frame fixed type | 300 mm | 17 | no | maliyahatina_con | 15 | |
| 53 | Dot punch | 100 mm | 30 | no | maliyahatina_con | 15 | |
| 54 | Safety goggles | AS PER FITTER SYLLABUS | 15 | no | maliyahatina_con | 15 |
Categories
99
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Required Documents
Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC)
OEM Authorization Certificate
OEM Annual Turnover
Additional Doc 1 (Requested in ATC)
Additional Doc 2 (Requested in ATC)
Additional Doc 3 (Requested in ATC)
Additional Doc 4 (Requested in ATC)
Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer